A molding mold for mineral water bottles, including an operating platform, wherein a lower mold is fixed on the operating platform, the lower mold is covered with an upper mold, the lower mold and the upper mold are both provided with a half-spliced mold groove, the mold groove is provided with a ring bulge and a thread bulge, the lower mold is fixed with a first cylinder block, the piston rod of the first cylinder block is fixed with a blow-molding interface that is close to the upper and lower molds, The second cylinder block is fixed on the upper mold, and a cutter is fixed on the piston rod of the second cylinder block. The cutter can cut the plastic tail after solidification, reducing the process of trimming the plastic tail after the later work, and the cutter contacts closely with the upper mold. Mold Of Mineral Water Botter,Cup Plastic Mold ,Pet Preform Mould ,Water Bottle Mold Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com
1. Made of High transparency PP material, adapted to micro centrifuge, widely used in molecular biology,clinical chemistry and Bio-chemistry research.
2. Available in various volume:0.2ml,0.3ml,0.5ml,1.5ml,2ml,5ml.
3. The cap can be one-hand open and closed,Easy to operate.
4.Chemical corrosion and low temperature resistance.
5.No release reagent,plasticizer and fungistat addes during production,free of heacy metal.Â
6.Stable under high centrifuge speed,up to 15000rpm. It can guarantee staff safety and environment while testion toxic samples.
7.Adapted to wide range of temperature from -80 ºC to 120 ºC, no distortion.
8.Clear graduation on the wall for wasier observation.
9. Frosted area on the cap and tube for comenvent mark and identification.
Â
Preferably, both the lower mold and the upper mold are provided with an inner cavity, which is respectively connected with a water outlet interface and a water inlet interface, which can circulate cold water to cool the blow-molded mineral water bottle rapidly. The inlet and outlet cold water interfaces of the lower mold and the inlet and outlet cold water interfaces of the upper mold are symmetrically distributed to ensure the stability of the water inlet and outlet cold water circulation.
Medical Supply Plastic Micro Centrifuge Tube
Model NO.: RJ10038
G.W.: 11
Trademark: RuiJie
Transport Package: 500PCS*20bag
Specification: 0.2ml, 0.3ml, 0.5ml, 1.5ml, 2ml, 5ml
Origin: China
Medical Supply Plastic Micro Centrifuge Tube