Product Introduction:
MG serie pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance. Our MG pump is including: Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump. Dredge Pump Dredge Pump,Suction Slurry Pump,Sand Suction Slurry Pump,Centrifugal Slurry Pumps SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com
Absorption tower tail gas treatment system is an accessory system of acrylonitrile equipment and is used to treat organic substances such as non-methane total hydrocarbons in tail gas. In order to achieve exhaust emission compliance, in November last year, Jilin Petrochemical Company invested more than RMB 10 million in acrylonitrile plant and introduced catalytic combustion technology from Shanghai Donghua Environmental Engineering Co., Ltd. to reform the acrylonitrile exhaust gas treatment system. Based on the full use of existing equipment, technicians added some equipment and optimized the process plan. After the implementation of the transformation, the organic matters in the absorber tower exhaust gas are oxidized and the exhaust emissions meet the national environmental protection standards.
At present, the absorption tower exhaust system is in normal operation.
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m
Acrylonitrile absorption tower exhaust gas treatment system test victory
In late June, the first acrylonitrile absorption tower exhaust gas treatment system in the acrylonitrile industry in China was successfully tested at the acrylonitrile plant of Jilin Petrochemical Company. This technology not only solves the problem of the treatment of exhaust gas pollution in the absorption tower of low-purity propylene-acrylonitrile, but also accumulates experience for fuel-free treatment of acrylonitrile exhaust gas.