Cooling capacity 20kW-50kW
Characteristics:
1. Structure: Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2. Compressor: Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3. Axial fan: External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4. Evaporator: High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material
5. Condenser Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6. Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material(optional).
7. Refrigerant circuit: Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8. Water circuit: Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9. Electric panel: Compressor contactor, Compressor protection breaker, Fan motor protection breaker, Control circuit protection breaker, Phase sequence relay (only for 3-phase), Programmable microprocessor controller
10. Optional: Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed; Stainless steel covering; Remote condenser; Tube in tube heat exchanger; Water circuit electric heater.
Mini Chiller Mini Chiller,Commercial Mini Chiller,Central Mini Chiller,Air Cooled Mini Chiller Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl
1. The machine body applied with most solid design which can ensur no deformation long time operation and transportation.
2.  The machine fixed with LEADSHINE brand stepper motor and driver, inner sliding guide system.
3.  Adpots with adanced DSP control technology, fixed with high quality electronic parts, ensure high cutting engraving speed, high accuracy and high stability, long time usage life.
4. Applied with imported lens and reflector mirror, ensure high laser power efficiency.
5. The machine connect with computer by USB/ INTERNET wire or UÂ disk directly.
6.  With water cooling system, exhaust fan and water pump, etc.
7.  It have cutting and engraving function, it have half-cut function.
Machine details:
laser cutting machine parameter as below:
Â
 Model
HD-6040
HD-9060
HD-1080
HD-1390
HD-1410
HD-1610
HD-1810
HD-1612
Laser source
Wave Length(µm)
10.6
Optional Power (Â w )
60w, 80w, 100w, 130w, 150w
Cooling
Water Cooling
Working Para.
Working Area (Â mm )
600X400
900X600
1000X800
1300X900
1400X1000
1600X1000
1800X1000
1600X1200
Min. Line width( mm )
0.15 ~Â 0.3
Working speed  ( mm/M )
0 ~Â 36
Repeat precision (mm)
±0.05
Compatible format
PLT, DXF, AI, DST, DSB, JPG, BMP, GIF
Power
AC220V ± 10%, 50/60HZ
Dimension (cm )
135X100X115
150X120X115
160X140X115
190X150X115
200X160X115
220X160X115
240X160X115
220X180X115
Net Weight/ Gross weight (Â kgs )
240/320
270/360
300/400
350/500
400/550
450/600
500/650
550/700
Working environment
0 ~ 40ºC, clean and no-dust room, without water
Others
total power(w)
<1500
protection class
IP54
Laser safety class
4 class
Applicable industry:
Advertising, signage, gifts, garments, shoes, bags, curtain, model, home furnishing, decoration, label, electronical etc industry,
Suitable materials:
Acrylics, wood, paper, bamboo, fabric, cloth, leather, shoe bottom, woollen, plastic, ABS, resin, ceramic, and other nonmetal materials.
Samples display:Â Â 
Main accessories with machine:
Factory photo:
Aftersales service
1. Except consumable parts, whole set machine with 1Â year warranty.Â
    With durable maintainance and repair support.   Â
2. Profesional technical support by email or online timely, free software update.
3. If need, we can send technician to cuostomer place to supply service and support.Â
Contacts details:Â 
Signage/Acrylics/Wood Laser Cutting Engraving Machine 1390
Model NO.: HD-1390
Laser Classification: Gaseous Laser
Engraving Method: Vector Engraving
Engraving Machine Type: Laser Cutting Machine
Power: Small Power
Drive Type: Stepper Drive
Certification: Ce, FDA
Laser Type: CO2
Control: Automatic
Current: AC
Condition: New
Usage: Signage, Garments, Craft, Advertising, Textiles
Trademark: HONDAC
Transport Package: Plywood Box
Specification: CE, FDA
Origin: Dongguan China
HS Code: 8456110090
Signage/acrylics/wood Laser Cutting engraving Machine 1390