Relationship between gold leaching rate and leaching speed and leaching time

During the whole leaching process, as the leaching time increases, the leaching rate of gold increases continuously, but the leaching speed is continuously decreasing, and the leaching rate gradually approaches a certain limit value.
The reason why the leaching speed of gold gradually decreases with time is as follows:
1. During the leaching process, the volume and number of gold particles are continuously decreasing due to the continuous dissolution of gold.
2. With the leaching of gold, the diffusion distance of the cyanide agent, dissolved oxygen and gold is increasing.
3. While the gold is dissolved, the impurity elements in the pulp are continuously increased and accumulated, and some impurities may form a harmful film on the surface of the gold particles.

Sheet Metal Electropolishing is the process of smoothing and/or brightening a metal surface anodically in a concentrated acid or alkaline solution. QL Sheet Metal provides stainless steel polishing and other metal electropolishing services to customers by using Stainless Steel Electropolishing Machine with a good electropolishing stainless steel cost. Anoplate is set up to perform it on either Stainless Steel or other Nickel rich alloys (such Kovar and Invar). While it can be done on many base metals as a preplate operation, it is commonly done on stainless steel surface finish as a final finish. It provides a chemically and physically clean surface and removes any mechanical surface asperities which may be detrimental to the production of uniform and pit-free electroplated surfaces or the future performance and appearance of a stainless steel product. It helps to deburr machined edges and holes as well as removes any imbedded iron from the manufacturing process. The current is greatest on the outside edges and outside corners of parts, which are left especially smooth. The longer the process is applied, the greater the amount of metal that is removed: holes can be enlarged, threads can be rounded, and sharp edges can be smoothed.