What principle and type of density meter is used? First, the density meter is to use what principle Density meter Densitometer readings are larger and smaller because P = Ïgh. The deeper the density meter enters the liquid, the greater the pressure, so the densitometer readings are larger and smaller. Second, the type of density meter Common densitometers and hydrometers include float densitometers, static pressure densitometers, vibratory densimeters, and radioisotope densitometers. U type oscillation tube If a U-shaped glass tube is filled with a volume of a liquid sample, the change in its vibration frequency or amplitude reflects the mass or density and specific gravity of a certain volume of sample liquid. The two scientists later designed the prototype and handed it to Mr. Urich Santner and his company Anton Paar to design the earliest digital liquid density meter in 1967. At present, fully automatic liquid density meters are based on the principle of U-shaped oscillating tubes. The radioisotope densitometer instrument is provided with a radioisotope radiation source. Its radioactive radiation (such as gamma rays) is received by the radiation detector after passing through a certain thickness of the measured sample. The absorption of radiation by a certain thickness of the sample is related to the density of the sample, and the signal of the radiation detector is related to the absorption, thus reflecting the density of the sample.
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10).
Tyre Pyrolysis Equipment Pant,Plastic Pyrolysis Machine For Sale,New Design Tyre Pyrolysis Machinery,Tyre Pyrolysis Plant Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
The gravity of the object pulls the object toward the ground, but if the object is placed in liquid, a force called buoyancy will produce a force in the opposite direction. The buoyancy force is equal to the gravity of the liquid the object replaces, or the gravity of the drained water.
The densitometer floats or sinks according to changes in the balance of gravity and buoyancy. A well-functioning densitometer can only float, so the force pushing the buoyancy upwards is slightly larger than the force pulling it down.
Because the volume of the densitometer does not change, it has the same volume of boiling water*. However, it becomes heavier because it contains more water. When gravity is greater than buoyancy, the density meter sinks. The weight of the densitometer is less than the weight of the same volume of water, so the densitometer floats again. Densitometer readings are big, small and small. When it is immersed in different liquids, the volume does not change. The iron sand or lead particles at the bottom of the densitometer are used to maintain the balance!
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.