PVC Pipes and Joints Injection Molding Making Machine

Computerized: Computerized
Certification: CE, ISO9001:2008
Material: Stainless Steel
Certificate: Ce,ISO,SGS
Composition: Injection Machine
Processing Material: Pet ,PP,PE
Elctric: Siemens,Mitsubishi,etc
Warranty: Two Years
Capacity: 90ton to 1000ton
Exchange Parts: Free
Market: Global
Trademark: Proman
Transport Package: Wooden Cases
Specification: 3m*1.8m*2m
Origin: China
HS Code: 84774010
Product Description

Servo Energy Saving Injection Molding Machine

Servo energy saving injection molding machine output power changes with the loading changing. There's no extra waste of power. The motor doesn't work while cooling, electricity consumption is 0. As compared with the tradition injection molding machine, the servo machine can save electricity 20%-80% that brings you excellent profit.
-Excellent energy saving

As compared with the traditional fixed pump injection molding machine, it saves energy 20%-80% under the same working condition.
-Excellent injection molding stability

The pressure and flow of servo drive system applies closed-loop control, as compared with the traditional injection molding machine, it greatly increases repeatability precision of injection molding.
-Fast response

Fast response servo drive, the start time faster than that of the traditional injection molding machine by 50%.
-Environmental friendly

The complete machine runs under low noisy, low speed operation and quite.
-Constant oil temperature

The servo motor output hydraulic oil according to proportion to avoid extra heat. Even the hydraulic oil need not to be cooled to realize excellent water saving.

PVC Pipes and Joints Injection Molding Making Machine

INJECTION UNIT   A B
Screw diameter mm 54 56
Shot size(theoretical) Cm³ 720 770
Shot weight g 650 690
Injection pressure Mpa 190 178
Injection rate g/s 200 215
Screw L/D ratio L/D 22.5 21.6
Screw speed r.p.m 0-180
Nozzle Diameter Srmm 20
CLAMPING    
Clamp tonnage KN 2600
Toggle stroke mm 530
Mould Thickness mm 200-550
Space between tie-bars mm 554X554
Ejector stroke mm 160
Ejector tonnage KN 70
Ejector number Piece 9
Hole Diameter mm 160
OTHERS    
Heat power KW 15.5
Max. pump pressure MPa 16
Pump motor power KW 25
Valve Size mm 16
Machine dimension m 6.1X1.7X1.8
Machine weight t 8
Oil tank capacity L 350
               
               

PVC Pipes and Joints Injection Molding Making Machine
PVC Pipes and Joints Injection Molding Making Machine
PVC Pipes and Joints Injection Molding Making Machine
PVC Pipes and Joints Injection Molding Making Machine
PVC Pipes and Joints Injection Molding Making Machine
 

Temporary Steel Hoarding

Temporary Steel Hoarding,Free Standing Temporary Steel Hoarding,Temporary Metal Hoarding Fence,Temporary Steel Hoarding Panel

Haotian Hardware Wire Mesh Products Co.,Ltd , https://www.hshtwiremesh.com