M3half-track half tracked armored personnel carrier

The China Motor Mobile Troops column contains a total of 2 categories of 5 manufacturers, 6 troop carriers, 9 troop carriers, and the latest personnel troop announcements, environmental announcements, and fuel announcements. Announcements, pictures, news, and the most timely information on the prices of personnel carriers.

Basic Information Name: Half-Track Armoured Personnel Carrier

M3 Half-Track half tracked armored personnel carrier

Development: Autocar Company of Ardmore, US
Diamond T Motor Company Diamond T Motor Car Compa
Manufacturer: Ardmore, Autocar Company of Ardmore, US
Diamond T Motor Company Diamond T Motor Car Compa
Status: Complete Production Plan
Equipment: Argentina, Cameroon, Colombia, Dominica, Greece, Israel, Japan, Mauritania, Mexico, Morocco, Niger, Paraguay, Senegal, Taiwan Province of China, Thailand, Togo and Zaire.


Overview In 1937, the United States adopted the M2 non-armored half tracked vehicle chassis and the M3A1 reconnaissance vehicle body to make the T7 vehicle. After the T7 vehicle was shaped, it was called the M2 half tracked vehicle. In 1939, the M3 half tracked vehicle was developed. The body of the car is slightly longer than that of the M2, so that it has greater bearing capacity. In 1940, Ardmore Motors, Diamond T Motors, and White Motors signed a contract for the production of a half-tracked vehicle with the Army. These vehicles use White's 160AX gasoline engine, Spicer's transmission and the Timken-Deroit axle. In order to further expand production, UW Harvester also produced the M9 and M5 half-track vehicles, which use many of the company's auto parts, but their performance is comparable to that of the M2 and M3 parts. By 1944, the United States had continuously produced 42,000 semi-track-type vehicles. In the Second World War, a large number of allied forces were equipped. In the 1967 and 1973 wars, Israel also made heavy use of half-track vehicles. The power of its current half-track vehicles has been converted into General Motors (GMC) 6V-53 diesel engines (128kW/2800r/min). Because of the shortcomings of half-track vehicles, the United States Army has replaced it with a full-crawler armored personnel carrier at the end of the 1940s.


Structural Features The half-track vehicle adopts a traditional overall layout with the engine at the front, three occupants centered and the crew room behind. In order to facilitate the vehicle to cross the trench, a round roller is installed in front of the car, and some vehicles use a winch with a pulling force of 44.5 kN instead.
All types of half-track vehicles use standard automotive components. The only difference is the engine. M2 and M3 and their variants use White's 160AX water-cooled gasoline engine, while M5 and M9 and their variants use the IWC's water-cooled gasoline engine. The front of the powerhouse is armored shutters that protect the radiator and can be operated in the cab.
Transmissions include mechanical 4-speed gearboxes, 2-speed gearboxes, cardan shafts, full-floating axle shafts, and automotive front and rear axles. The steering of the vehicle is steered with a steering wheel. With foot brake and hand brake.
The body is semi-open type and is made of rolled steel plates that are connected by screws. In front of the occupant's compartment is a windshield made of 12.7mm thick unbroken glass that can be removed during combat and the armored front window with two observation holes is lowered. The doors on both sides can be opened forward. The upper part of the side door has a viewing hole protected by a sliding cover. To expand the field of vision, the upper half of the door can be opened outward.
There is a door to the right in the back of the passenger compartment. If necessary, a bow bracket and a canvas cover can be placed on the top of the passenger compartment. The front of the loading room is equipped with a machine gun holder, but different types of vehicles are equipped. The M2 and M2A1, M9 and M9A1 vehicles have two 12.7mm machine guns, M3 and M5 only have one 7.62mm machine gun, and the M3A1 and M5A1 each have one 7.62mm and 12.7mm machine gun.
The front track of the half-track vehicle adopts a multi-layered reinforced tire with built-in ballistic packing. Each of the two tracks has a driving wheel and an inducer with tensioning device. There are 8 small weight wheels. The driving force of the driving wheel is directly transmitted by the half shafts. Track suspension is a spiral spring linkage. Use non-slip plastic track.
All kinds of half-track vehicles are capable of floating without water, and there are no three defense devices.


Performance data
model M2A1
Crew 10 people
Battle full weight 8890kg
net weight 6940kg
Unit power 10.6kW/t
Captain (rotary roller) 5.962m
Captain (mount winch) 6.137m
Car width 2.221m
Vehicle height 2.692m
Floor height 0.233m
Track (front) 1.637m
Track (back) 1.722m
Track bandwidth 305mm
Long distance 1.187m
Highway maximum speed 64km/h
Fuel reserve 227L
Highway maximum travel 280km
Deep wading 0.812m
Climbing degree 60%
Climbing vertical wall high 0.304m
Tire specifications 8.25x20
Brake type Hydraulic pressure
Electrical system voltage 12V
Battery quantity/voltage 1/12V


engine
production company White
model 160AX
Types of 6 cylinder inline gasoline engine
Power/speed 94kW/2800r/min


transmission
production company Spicer
Types of Manually
Forward/reverse gear 4/1
Transmission case 2 speed
Clutch type Monolithic dry


Suspension device
before Leaf spring
Rear Scroll spring


Weaponry
Main weapon 12.7mm machine gun 1 very
Sub Weapons 7.62mm machine gun 1 very
Main weapon ammunition base 700 hair
Submunitions for ammunition base 7750


Armor
Body front Homogeneous 7mm steel plate
Side Homogeneous 7mm steel plate
Front upper Homogeneous 12.7mm steel plate
Top (engine) Homogeneous 7mm steel plate
rear Homogeneous 7mm steel plate
[1]

180 M3/h Concrete Batching Plants

It is assembled by building blocks, which is short, quick and convenient.It is convenient and quick to use the cylinder discharge or electric push rod to discharge.It is assembled by building blocks, which is short, quick and convenient.It is convenient and quick to use the cylinder discharge or electric push rod to discharge.A variety of mixing processes, highly automated, high production efficiency,Environmental protection and energy saving, using pulse dust removal, recycling waste-water for reuse.This product(concrete batching plant) is a fully automatic concrete mixing equipment consisting of five systems of mixing, electrical control, storage, conveying and weighing.This product(concrete batching plant)mainly consists of 5 major systems such as mixer, material weighing system, material conveying system, material storage system and control system and other ancillary facilities.

This product(concrete batching plant) is equipped with the storage, batching, conveying, stirring, control and other devices of various raw materials required for precast concrete, and various aggregates, powders, admixtures, water, etc. A complete set of equipment for supplying concrete in a concentrated manner than by a mixer.

180M3/H Concrete Plant Machine,Hzs180 Concrete Batching Plant,180M3/H Concrete Mixing Plant,180M3/H Concrete Mixing Plant Machine

Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyuconcretemachine.com