High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger Equal Hydraulic Oil Cooler/ Air Compressor Oil Cooler Bl26 Series

Model NO.: BL26
Origin: China
HS Code: 8419500090
Hydraulic oil cooler Description
Heat exchangers are used to exchange heat between two fluids. Plate heat exchangers are high performance components and provide a high level of efficiency combined with compact dimensions and low weight. Their efficiency reduces the amount of cooling water required for heat transfer which results in low operating costs.
Features
Plates and connections are manufactured from stainless steel to AISI 316, vacuum brazed with cooper. The special moulding of the plates produces the turbulent flow necessary for effective heat transfer and provides the plate heat exchanger with a high level of mechanical strength.
Operating Details
Medium:
Water glycol
HFC operating fluids
Water
Oil
Contamination
The quantity of particles in suspension should be less than 10 mg/l, particle size <0.6mm
Thread like particles cause a rapid rise in pressure drops.
Temperature range:
10C to 225C (freezing point and boiling point must be taken into consideration)
Pressure:
Max 45 bar up to 225C, testing pressure 60 bar.
Corrosion
The following limits refer to a pH value of 7
Free chlorine. CL2<0.5ppm
Chloride ions CL
<700 ppm at 20C
<200 ppm at 50C
Other limits
PH7-10
SULPHATE so4 2-<100 ppm
[HCO3]/[SO4 2-]>1
Ammonia, NH3< 10 ppm
Free co< 10 ppm
The following irons are not corrosive under normal conditions:
Phosphate, nitrate, nitrite, iron, manganese, sodium and potassium
Application
Hydraulic oil cooling, Electricity and cogeneration applications, marine oil cooling, turbine engine oil cooler, automotive, construction, railways, steel industry
Model BL14 BL20 BL26 BL26C BL50 BL95
Width, A [mm]  78 76 111 124 111 191
Height, B [mm]  206 310 310 304 525 616
Length, E [mm]  9+2.3n 9+2.3n 10+2.36n 13+2.4n 10+2.35n 11+2.35n
Horizontal port distance, C [mm] 42 42 50 70 50 92
Vertical port distance, D [mm]  172 282 250 250 466 519
Max pressure [Mpa]  3 3 3 3/4.5 3/4.5 3/4.5
Max flowrate [M3/h]  3.6 3.6 8.1 8.1 12.7 39
Weight [kg]  0.6+0.06n 1.0+0.08n 1.3+0.12n 2.2+0.16n 2.6+0.19n 7.8+0.36n
 
Model BL120 BL190 BL200 BL1400 BL100  * BL200  *
Width, A [mm] 246 307 321 429 248 322
Height, B [mm]  528 696 738 1398 495 739
Length, E [mm]  13+2.36n 13+2.75n 13+2.7n 22+2.78n 10+2.15n 13+2.55n
Horizontal port distance, C [mm] 174 179 188 220 157 205.2
Vertical port distance, D [mm] 456 567 603 1190 405 631
Max pressure [Mpa]  3 3 2.1 1.5 3/4.5 3/4.5
Max flowrate [M3/h]  42 100 100 300 42 100
Weight [kg]  7.2+0.52n 12.5+0.72n 13+0.75n 31.8+1.73n 6.5+0.37n 13+0.78n

High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger Equal Hydraulic Oil Cooler/ Air Compressor Oil Cooler Bl26 Series
High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger Equal Hydraulic Oil Cooler/ Air Compressor Oil Cooler Bl26 Series
High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger Equal Hydraulic Oil Cooler/ Air Compressor Oil Cooler Bl26 Series
High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger Equal Hydraulic Oil Cooler/ Air Compressor Oil Cooler Bl26 Series
 

In mechanically controlled air suspension systems, the device that measures the level also controls the air spring. With ECAS, an electronic system takes over control, regulating the air springs by means of solenoid valves informed by measured values from Sensors.The Solenoid Valve can adjust pressure in all of the air bags or in individual air bags. This allows ECAS to compensate for inclinations caused by unbalanced loading in the front, rear, left side or right side of the bus.

ECAS Solenoid Valve

Ecas Solenoid Valves For Iveco,Ecas Solenoid Valves For Daf,Ecas Solenoid Valves For Neoplan,Ecas Solenoid Valves For Daf Trucks

SHANGQIU FLAT WORLD MACHINERY CO.,LTD , https://www.flatworldtrucks.com