Diamond Wire Saw Cutting for Marble Profiling and Square Cutting

Model NO.: BLMQ, BLGQ
Kind: Stone Sawing Machine
Saw Blade External Diameter: 11.5mm
Trademark: BESTLINK
Transport Package: Carton
Specification: as per order details
Origin: Fujian, China
HS Code: 82029910
Diamond Wire Saw Cutting for Marble Profiling and Square Cutting

At present, the diamond wire has already used more and more for quarries.
It has more advantage than traditional quarry operation.
It is high efficiency and high output and lower waste of quarry resource.
It can be used for great area cutting. The block is regular, without internal injury,
It is low-noisy, no-dust and safe operation.
1. The wire allows significantly greater sawing heights than large discs.
2. Thinner cutting width, and more precise.
3. By virtue of its reliability, adjust the cutting techniques according to different stone material.
4. Noise nuisance generated by diamond wire saw is significantly less than produced by other sawing techniques.


1. Description:
The marble/granite quarrying wire be mainly used for cutting directly in the marble/granite quarries or for squaring marble blocks.

The diamond wire is essentially composed of three main components:
* Diamond Wire with diefferent diameter depending on the application.
The cable is formed by 7 secondary cables with different diameters depending on the type.
* Sintered diamond beads.
Bond and diamond studied for the material to cut.
* Assenbly with springs, rubber or plastic.
Protects the steel cable from the abrasive action of the stone and also sbsorbs the energy
Of the cutting friction of the beads against the stone.


2. Advantage of Diamond wire saw.
* Good performance for cutting big-size blocks without inner break
* No vibration while cutting
* Low noise
* Excellent precision
* Hight cutting speed
* Energy consumption reduced to the minimum


3. Attentions for the diamond wire cutting on stationary machines
*Regular inspections of diamond wire self rotation and make adjustment in time.
*Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, once it happens, make the solution in time.
* Regular inspections the joint, as well as the beads of two sides, if they are abrase badly,
Replaces them in time
*The steel cable tension of the stationary machines should be controlled within 250-300kg(φ 4-5mm)
*Linear speed is changed according to the different hardness of stones.
* For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard
Mentioned above, it is good for sharpen.
*Water consumption is around 15-25L/min.
Bead dia.
 (mm)
Model  Fixed by Beads
/m
Remark          Cutting
material
Line
speed(m/s)
Efficiency
(m2/h)
Life
time(m2/m)
 
Φ10.5 BLMQ High
Performance
Rubber
37 Sintered
beads
 Soft marble 25-35 8-12 25-45  
Mid-hard
marble
22-32 6-10 15-25  
Φ11.5 BLMQ 40  
Hard marble 20-30 5-9 10-20  
Φ11.5 BLMQ  
Bead dia.
(mm)
Model  Fixed by Beads
/m
Remark          Cutting
 material
Line
speed(m/s)
Efficiency
(m2/h)
Life
time(m2/m)
Φ11  BLGQ High
Performance
Rubber
40 Sintered
 beads
Soft granite 22-28 4-8 10-20
Mid-hard
 granite
20-24 2-5 7-15
Φ11.5 BLGQ Hard granite 18-22 1-3 5-8
High
abrasiveness
26-30 4-8 8-15


Diamond Wire Saw Cutting for Marble Profiling and Square Cutting
Diamond Wire Saw Cutting for Marble Profiling and Square Cutting
Diamond Wire Saw Cutting for Marble Profiling and Square Cutting

Diamond Wire Saw Cutting for Marble Profiling and Square CuttingDiamond Wire Saw Cutting for Marble Profiling and Square Cutting

chainstitch sewing machine

chainstitch sewing machine,feed-off-the-arm chainstitch sewing machine,chain stitch sewing machine needles

DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , http://www.ch-sewing.com