Tank Truck Fuel Transfer Vane Pump

  • Model NO.: YB-50/65/80/100
  • Type: Vane Pump
  • Performance: Explosion
  • Place of Origin: Zhejiang China (Mainland)
  • Name: Yb Vane Pump/ Vane Truck Pump /Fuel Dispenser Pump
  • Transport Package: Wooden Cases
  • Origin: Zhejiang, China
  • Acting Form: Single-Acting
  • Displacement: Variable Pump
  • Certification: ISO
  • Model Number: Yb-50/80/100
  • Trademark: JIASONG
  • Specification: SGS
  • HS Code: 8413810090
Main Features

YB series self-priming rotary vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The pump has its obvious advantage in the transmission of high flow at low revolution.
Application
Oil tank truck
Fleet refueling.
Lube oil
Aviation refuelers
Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.

Installation

With cardan shaft or hydraulic motor, the pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the pump can also transfer a wide variety of solvent in the petrochemical industry.
Model Size/Flow Rate/Speed 650 RPM 600RPM 550 RPM 500 RPM 450 RPM 400 RPM
G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min G/min L/min
YB-50 50mm/2'' 80 300 72 270 64 240 56 210 48 180 40 150
YB-65 65mm/2.5'' 132 500 123 465 114 430 103 390 93 350 82 310
YB-80 80mm/3'' 265 1000 243 920 222 840 200 760 180 680 160 600
YB-100 100mm/4''             505 1900     405 1530
 Performance Data
Model YB-50 YB-65 YB-80 YB-100
Rated Speed 640RPM 640RPM 640RPM 640RPM
Power HP 3.0 5.0 10 25
KW 2.2 4 7.5 18.5

Tank Truck Fuel Transfer Vane Pump

Product description:


With our vast experience & knowledge in this field, we are engaged in manufacturing a quality-assured ranges of Heat Sink.

The material used partly determines the extent of thermal conductivity. Copper and aluminum are the most widely used materials, though aluminum is the more common choice because copper is more expensive and heavier. Aluminum 6061 and 6063 are widely used with a thermal resistance of 166 and 201 W / mK, respectively.

Cpu Heatsink

Cpu Heatsink,Cpu Water Cooler,Cpu Cooler,Cpu Cooling Fan

Timeplex Industrial Limited , https://www.timeplexhk.com