QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.
We have a wealth of experience in designing the correct bucket elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.
Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.
For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.
Standard features for all our bucket elevators
• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch
• Belt tracking sensor or switch for belt Bucket Elevators
Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--
Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com
For Turning Tube Plate, Tire Mold, Wheel Hub Turbine, Flange, Oil Pan, Shaft, etc.
More than 50 years' experience in machinery industry since 1960s.
Manual Control, FANUC, SIMENS or Chinese Brand system (Optional)
Base adopts triangular guide design
Reasonable structure
High performance with low cost
Maximize Customer's Profitability under the minimum investment cost compared with other competitors.
The base guide of floor-type lathe adopts rectangular structure, which ensures a large span and high rigidity. It is very suitable for low speed and high load cuttings. This machine has a high carrying capacity, high rigidity, optimal appearance design and easy operation. It is widely used for machining neutral parts with large diameter, such as tire mold, large flange tube plate, turbine parts, end enclosure, etc. It is also extensively applicable for manufacturing the parts of chemical industry, heavy machinery, mining and railway equipment and aviation industry.
Name
CX6010
CX6012
CX6016
CX6020
CX6025
CX6025
CX6030
CX6036
Item
Unit
Max. Swing Diameter
mm
1000
1200
1600
2000
2500
2500
3000
3600
Max. Weight of work-piece
T
1
1
2
2
3
2
5
5
Max. Length of work-piece
mm
400
400
400
600
600
600
600
500
Range of Spindle Speed
r/min
16-128
16-128
16-128
12-94
12-94
12-94
4-40
4-40
Chuck Diameter
mm
800
1000
1400
1600
2000
2000
2500
3000
Horizontal Stroke
mm
320
320
320
320
320
320
320
320
Longitudinal Stroke
mm
500
600
800
900
1250
900
1500
1800
Main Motor Power
Kw
7.5
7.5
11
15
15
15
22
30
1. We provide professional technical training for users' operators and maintenance staff to enable them to properly use and operate the lathe and carry out normal maintenance.
2. Warranty period: One year after acceptance of the lathe.
3. In case of any quality problem found during operation, the factory will dispatch personnel to the user's location within 48 hours (domestic users) & within 3 days (Foreign Customer) and the technical staff won't leave before resolving the malfunction.
4. The company will freely provide different electrical and mechanical parts for the purchased lathe timely within warranty period.
5. The company will provide lifetime guarantee for the consulting services in terms of application, maintenance, repair, renovation, etc of equipments.
For more details, please feel free to contact us. Thanks!
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators
Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.
Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged head Pulley
• Slatted return pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.
Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.
Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres
Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and tail pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.
Floor-Type Horizontal Lathe Machine for Machining Turbine Parts (CX6010)
Model NO.: CX6010
Automatic Grade: Automatic
Setting Mode: Floor-type
Precision: High Precision
Certification: ISO 9001
Condition: New
Name: Floor-Type Horizontal Lathe Machine for Turbine PA
Machining Parts: Flange, Tire Mold, Cylinder, Wheel Turbine, etc.
Max. Swing Over The Bed: 1000 mm
Max. Length of Work-Piece: 400 mm
Max. Weight of Work-Piece: 1t
Chuck Diameter: 800 mm
Delivery Time: 60 Days
Installation and Commissioning: Available for Foreign On-Site Service
Quality Warranty Period: One Year Quality Warranty
Customized Lathe Machine: Manufacture Customized Lathe
Trademark: NTM or Customized Brand is also available
Transport Package: Wooden Box Package
Specification: CE, ISO9001
Origin: Qingdao, China
HS Code: 84581900
Large Floor-type CNC Lathe