Best Price Custom Bicycle Spare Parts

Technics: MIM
Quoted Condition: 2D / 3D Drawing / Sample
Package: Carton, Plastic Bag, Export Package
OEM/ODM: Welcome
Production Time: 15-30 Days
Weight: 24.8g
Size: 102.5*10.4 mm
Trademark: drome
Transport Package: Carton
Specification: 290*190
Origin: Suzhou, China
Technics: MIM
Quoted Condition: 2D / 3D Drawing / Sample
Package: Carton, Plastic Bag, Export Package
OEM/ODM: Welcome
Production Time: 15-30 Days
Weight: 24.8g
Size: 102.5*10.4 mm
Trademark: drome
Transport Package: Carton
Specification: 290*190
Origin: Suzhou, China
MIM(Metal powder Injection Molding) isthe5th generation of metal forming technology.  Over 40 years of development, people gradually find more applications for MIM process especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years.
Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.


MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production

Flow chart of metal injection molding

Best Price Custom Bicycle Spare Parts


Application of MIM
Best Price Custom Bicycle Spare Parts






Products Range:
 
Material   Typical Values    
Designation Code Density g/cm3 Tensile Properties Young's modulus, Gpa Un-notched Charpy Impact Energy,J Hardness,Rockwell
    UTS. Mpa Y.S. (0.2%), Mpa Elongation (in 25.4mm) %     Macro (apparent)  Micro (converted)
MIM-Fe2Ni 7.8 280 115 25     55 HRB  
MIM-Fe8Ni 7.8 450   12     84HRB  
MIM-2200 (as sintered) 7.8 290 125 40.0 190 135 45 HRB  
MIM-2700 (as sintered) 7.8 415 255 26.0 190 175 Tower Crane Gear

Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are connected with two motor shaft repectively, which are connected with 99 teeth gear. The speed is reduced by the transmission of gears.


A bevel gear is a type of gear that has teeth cut on a conical surface. It is commonly used in tower cranes to transmit power between the vertical and horizontal shafts.
In a tower crane, the bevel gear is typically used to change the direction of rotation. The vertical shaft, which is connected to the motor, rotates vertically, while the horizontal shaft, which is connected to the crane's boom, rotates horizontally.
The bevel gear consists of two gears with intersecting axes. The teeth on the gears are cut at an angle, allowing them to mesh smoothly and transmit power. The gear ratio of the bevel gear determines the speed and torque of the rotation.
The bevel gear in a tower crane is designed to withstand heavy loads and provide efficient power transmission. It is usually made of high-strength steel to ensure durability and reliability in demanding crane operations.
Overall, the bevel gear plays a crucial role in the functioning of a tower crane by enabling the transfer of power and changing the direction of rotation between the vertical and horizontal shafts.

Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft

SHEN YANG BAOQUAN , https://www.bq-cranes.com