High-altitude truck manufacturers tell you about effective fuel-saving measures

High-altitude truck manufacturers tell you about effective fuel-saving measures

First, the vehicle starts and accelerates with the fuel-saving high-altitude vehicle before the start of the engine start quality and fuel consumption is a direct relationship, the more the number of starts, the more air fuel consumption. Therefore, improving starting quality is an important part of saving fuel. The start-up and acceleration of high-altitude vehicles have certain effects on fuel economy. The high-altitude trucks started steadily and evenly accelerated, and they were significantly faster than the initial acceleration. In order to save fuel at the start and speed increase, resistance should be selected at the start and fuel should be added smoothly. Do not stomp the throttle, so as to avoid fuel consumption, the clutch must be quite accurate, the throttle control is moderate, the start is smooth and natural, and the acceleration is even, which can not only save fuel, but also reduce the wear of the machine parts.

Second, vehicle start and fuel economy

The economic speed is the minimum speed of fuel consumption when the overhead vehicle is in the form of direct or overdrive. High-altitude trucks are used on the same roads. They have different speeds and different fuel consumption. Therefore, the fuel consumption is the lowest at a certain speed. Therefore, the car should use the direct speed or high speed medium speed in the form, which can save fuel consumption.

Third, the height of the truck and fuel economy

The temperature of the aerial vehicle engine is directly related to the fuel saving. If the temperature is too high or too low, the oil consumption will increase. The engine operating water temperature should be maintained between 80 °C -90 °C. Preheating is required when the engine is started under low temperature conditions, and the engine is warmed up to warm up, which can significantly save oil.

Fourth, the choice of stalls and fuel economy

The choice of gears and shifting actions have a great impact on the fuel consumption. At the start, the gears should be reasonably selected according to the load and road conditions. When driving, when you feel that the power is insufficient, you should promptly reduce the speed. You should not only use the increased throttle to solve the problem of insufficient power, and you will only step on the accelerator to increase fuel consumption. When changing gears, you must use your hands lightly and quickly to move accurately. This can shorten the distance that the vehicle travels when shifting, and achieve the purpose of fuel economy.

Fifth, correct taxiing and fuel economy

The use of ramps to glide, that is, in the case of small slopes, safe and guaranteed conditions, can use the downhill to do a proper taxiing, which can also save oil. According to the needs of deceleration or parking in the traffic, the distance of the target is accurate, and the accelerator pedal is released in advance with the foresight, and the purpose of deceleration or parking is reached through taxiing.

Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. is located in "China's Special-purpose Vehicle Capital" and "Yandi Shennong Hometown" - Suizhou City, Hubei Province. It is a modification base of Dongfeng, FAW and heavy duty vehicles, and a designated manufacturer of the National Development and Reform Commission. , Registered trademark "Chu Sheng" brand, product code "CSC". Specializing in the production of aerial vehicles, Jiangling aerial vehicles, Dongfeng aerial vehicles, Isuzu aerial vehicles, JAC aerial vehicles, Qingling aerial vehicles, etc.. Prices, pictures and parameters of aerial vehicles, please see the official website: http:// 24-hour ordering number: 18727982299 0722-7508811

Silicone Soap Molds

For the Silicone soap molds:
Sometime there are some factories buy some soap molds to make soap.But why they choose silicone material as raw
material?
1.Easy to clean.2.Flexible in design.3.Colourless and odourless in material.4.FDA Material.5.It not only can use in cake baking,but also can use in chocolate molds.6.Applicable to all people.

Soap molds introduction:
1.Product name:Silicone Soap Molds,Soap Mold Silicone,Silicone Molds for Soap Making,Soap Silicone Mold,Custom Silicone Soap Molds,Silicone Soap Mold Loaf
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Logo:Printing,debossed,embossed
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Use in soap maiking molds

10.Silicone soap molds photos for reference.

Customized Soap Mold

Silicone Soap Molds,Soap Mold Silicone,Silicone Molds for Soap Making,Soap Silicone Mold,Custom Silicone Soap Molds,Silicone Soap Mold Loaf

Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconepettags.com