Solar Water Heating with Solar Cutting Machine

Solar Water Heater Tank Machinery Line with TIG and MIG Welding Machine



1. Multi-functional automatic discharge, leveling, count length, shearing lamination unit(sheet)
1. Model:LPJZ-001
2.Rated voltage:380V
3. Rated Power:8KW
4.Processing plate thickness(mm):0.31-0.5
5. Processing plate Width(mm):0-1200
6. Shear length range: Adjustable
7.Leveling Accuracy(Mpa):1-2mm
8.Shear length and precision:0.5mm/M
Use delta PLC control system and servo motor drive, electric part is the CHNT electric, pneumatic element is AIRTAC. The electric part warranty period is one year.

 

2. High precision shearing machine
1.shearing material:4*3200mm
2.shearing material :≤2.5mm
3.Rated power:7.5KVA
4.Rated voltage:380VAC 50HZ
5.Net weight:4600KG
 


3. Moving work table- CNC punch press feed system
1. adopt Taiwan sets of high precision servo motor and PLC programming, touch screen.
2. the deep throat 16T punch grinder.
3. the ball screw, guide the Taiwan won, punching spacing stepless is adjustable
4. working mesa longitudinal effective length is 3200mm, transverse effective length is 1250mm.
5. CNC moving workbench rated power: 2KW
6. a panel of the brush
7. the mesa is equipped with two clip materials pneumatic head.
8. punching spacing accumulative total control error in 1mm inside.
9. rack with steel plate tailor-welded and into.
10. the pneumatic components manufactured by the guest's brand.



4. Automatic tig welding machine- open type
1.Barrel diameter:310-800mm
2.Workpiece thickness:0.31-0.5mm
3.Maximum barrel length:L=2500mm
4.Material: stainless steelgavalized steel 



5. Hose nipper machine (linear rail)
1.Tank diameter: 310-800 mm
2.The thickness of work piece: ≤2.5mm
3.Materials: stainless steel , galvanized steel



6. Hydraulic bending machine
1. type:WC67Y-100/3200
2. Nomal force:1000KN
3. work table height:3200mm
4. Distance between the pillar:2490mm
5. deep throat:250mm
6. ram stroke:100mm

7. Pneumatic automatic outer tank sewing machine -open type
1. Tank diameter:310-600mm
2. Working thickness:≤2.5 mm
3. Maximum working length:L=3000mm
4. Material :pearl plate,aluminizing zinc,stainless steel,Fluorine titanium plate etc

8. Automatic tank edge teething machine
1. Cylinder diameter : diameter 310-600mm
2. Working thickness: ≤2.5mm
3. The maximum cylinder length: L=3000mm
4.Grooving groove radius of ≤1.5mm(special specification like custom)
5. Material : pearl plate, galvanized, stainless steel , titanium ,etc…

9. Automatic leakage checking machine
1. tank diameter: 310-600mm
2. workpiece thickness: ≤2.5mm
3. max tank length: L=3000mm
4. Rated voltage : 220VAC 50HZ
5. Rated power:1.5KVA
6. Compressed air: 0.45Mpa

10. Automatic three kun rolling machine
1.diameter:Φ=310~800mm
2.workpiece thickness:δ≤2.5mm
3. maximum barrel length: L=3000mm
4.Material :stainless steel,galvanized steel
5.Rated voltage:380VAC 50HZ
6.Rated power:5.5KVA
7.Compressed air pressure :0.45Mpa
8. Electric part warranty period one year.
9.Pneumatic element: pneumatic element made by AIRTAC
 
11. Air pressure automatic inner tank strength machine
1.Barrel diameter: 310-800mm
2.Workpiece thickness:0.31-0.5mm
3.Maximum barrel length:L=2500mm
4.Rated voltage:380VAC 50HZ
5.Material :stainless steel,gavalized steel
 
12. Air pressure automatic inner tank flanging machine
1.Rated voltage:380VAC 50HZ
2.Barrel diameter:310-600mm
3.Workpiece thickness:0.31-0.5mm
4.Maximum barrel length:L=1500mm
5.Revers height≤8mm
6.Material :stainless steel,gavalized steel
 
13. Air pressure tank tube flatting machine
1.Tank diameter:310-600mm
2.Working thickness:≤2.5mm
3.Maximum working length:L=3000mm
4. Rated voltage:380VAC 50HZ
5.Material :pearl plate,aluminizing zinc,stainless steel,Fluorine titanium plate etc

14. Pneumatic pulses welding machine
1.mode:FIN-35KVA                                                          
2.rated capacity:35KVA
3.secondary voltage adjustable range:2.0V-3.8V
4.Rated duty cycle:75%
5.The maximum welding thickness:0.31-0.5mm
6.Welding speed:Continuous adjustable stepless
7.Compressed air pressure(Mpa):0.45
8.Electric part warranty period one year.
9.Pneumatic element:pneumatic element made by AIRTAC
10.The device automatic turning etc characteristic
 
15. Puf machine
1. Ratio of raw material: 1:1 fixed
2. Viscosity range of raw materials: 200-1000CPS(under the operation temperature)
3. Output quantity of raw materials: 4-8 Kg/min
4. Operating temperature: 0ºC-65ºC
5. Cleaning style of spray gun: high-pressure mechanical cleaning
6. Drive mode: hydraulic drive
7. Maximum system pressure: 21Mpa
8. Working hydraulic pressure: 6-8Mpa
9. Power: three phase 380V 50HZ 20A
10. Power of raw material heater: 1250Wx2
11. Length of heating and insulation pipe: 8000mm
12. Overall dimension: 8000mmx800mmx1200mm
13. Shipping weight: 260kg
 
16. Pneumatic automatic locking machine
1.Cylinder diameter :diameter 310-600mm
2.Working thickness:0.31-0.5mm
3.The maximum cylinder length:L=3000mm
4.Grooving groove radius of ≤1.5mm(special specification like custom)
5.Material : pearl plate, galvanized, stainless steel , titanium ,etc…
 
 
17. Automatic packing and cleaning line
1. Voltage/power:380V  50/60HZ  1.2KW
2. Package size:W100-800*H30-570mm
3. Tie up speed:2.2sec/Strap
4. PP ribbon width:9-14 mm
5. Weight :280kg                       
6. Over dimension:1900*650*1750 mm
7. Electric parts ,CHNT
8. Maintenance time : one year
9. Pneumatic components is AIRTAC

What is the metal sheet Fiber Laser Cutting Machine?

Metal Sheet Laser Cutting Machine can only cut metal material in sheet. If you want cut metal tube, we have a special metal tube fiber laser cutting machine. If you want cut both metal sheet and metal tube, we also have metal tube and plate fiber laser cutting machine. It has the advantages of fast cutting speed, high precision, small area of heat affected area, stable performance, guaranteed continuous production, not easy to deform, smooth and beautiful cut seam, and no need for subsequent processing. Compared with other Metal Laser Cutter , fiber laser cutter can complete the processing of various complex structures. As long as it can draw any image on the computer, the machine can complete the processing without opening the mold, and the product can be produced immediately. That is, new products can be developed quickly and costs can be saved. No matter how complicated the process requirements are, fiber laser cutting machines can do it.

Therefore, with the above processing advantages, fiber laser cutting machines are widely used in advertising sign production, sheet metal structure, high and low voltage electrical cabinet production, textile machinery parts, kitchenware, automobiles, machinery, elevators, electrical parts, spring sheets, subway parts, etc.



Why to choose the fiber laser cutting machine ?
1. High cutting accuracy: The positioning accuracy of the metal laser cutter reaches 0.05 mm, and the repeated positioning accuracy reaches 0.03 mm.
2. Narrow slit: The width of the slit is generally 0.10-0.20 mm.
3. Smooth cutting surface: There is no burr on the cutting surface, and the roughness of the cut surface is generally controlled within Ra 6.5.
4. Fast cutting speed: the cutting speed can reach 10 m / min, and the maximum positioning speed can reach 30 m / min.
5. Good cutting quality: Adopting non-contact cutting, the cutting edge is affected by heat little, there is basically no thermal deformation of the work piece, to ensure that the work piece is not scratched, and the slitting generally does not require secondary processing.
6. Laser processing has good flexibility: the fiber laser cutting machine can process arbitrary graphics, and it can cut pipes and other profiles without being affected by the shape of the work piece.

Metal Sheet Laser Cutting Machine

fiber sheet laser cutting machine, laser cutting machine fiber, cnc fiber laser cutting machine, hot selling fiber laser cutting machine for metal,1000w fiber laser cutting machine, 3015 fiber laser cutting machine

Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com