Milk Production Line Machine Stainless Steel Mixing Tank

Model NO.: Stainless Steel Mixing Tank
Stainless Steel Mixing Tank: Food Grade Mixing Tank
Widely Use: Easy to Clean
Can Be Customized: Low Cost
Good Quality: with CIP System
Trademark: Li&Li
Transport Package: Woodern Box Package
Specification: GMP ISO9001
Origin: Guangzhou/Guangdong
HS Code: 4010110000
Product Description
Name: Stainless Steel Mixing Tank
Feature:equipments are designed and manufactured fully according to the demand of GMP and to
standards, such as steel pressure vessels (GB150-1998), andsteel welded atmospheric
pressure vessels (JB/T4735-1997), etc.

Description:
Product technical description:
Specification: 30L~50000L
Material: SS316L or SS304
Surface finish: inside surface is Ra0.28~0.6μm by mechanical polish. (passivation or electropolish are optional). Outside surface is Ra0.6~0.8μm by satin finish.
Agitator: Top mechanical agitator (propeller, spiral and anchor or others)
Pressure: ATM or pressure vessel (-0.1~1Mpa)
Structure: Single layer vessel, vessel with jacket, vessel with jacket and insulation
Jacket type: dimple jacket, full jacket, or coil jacket
Insulation material: rock wool
Components: vent filter, temp. gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to client's detail requirement.
Manufacture standard for pressure vessel: GB150-1998, ASME or PED/23/EC

Application:
Stainless steel stirred tank widely used in pharmaceutical, chemical, food, beverage, water treatment, brewing, ink, oil, printing and dyeing, environmental protection, oil, alcohol, hospitals and other industries, various types of liquid filtration, rough filtration, fine filtration, clarification ideal equipment purification treatment.
Stainless steel mixing tank is my company's own development of new products, with no leakage, fully enclosed, corrosion-resistant, energy-saving features. Due to its non-contact torque transmission to replace the static seal dynamic seal, to solve the other shaft seal can not overcome the problem of leakage, the entire media and agitation in sterile health status to operate, pharmaceutical, fine chemicals, cosmetics and biological engineering industry ideal replacement products.
Suitable material under a certain pressure mechanical stirring flammable, explosive, toxic, odor and other dissolved materials, sterilization, fermentation process takes a long time (over 24 hours) constant moving equipment. More suitable for biological engineering in the production process does not allow any trace leaks and contaminated equipment.

Technical Parameter

Effective volume
Dimension of tank Total height Diameter of inlet&outlet Heat preservation layer Motor power Blending speed
(L) (mm) (mm) (mm) (mm) (kw) (r/min)
500 840*1000 2750 60 38 0.55 Common rotation speed 35,43,60 ; stepless speed reducer or dual-speed reducer are also available
600 920*1000 2850 60 38 0.55
700 990*1000 2850 60 38 0.55
800 950*1220 3000 60 38 0.55
900 1010*1220 3000 60 38 0.55
1000 1060*1220 3150 60 51 0.75
1500 1160*1500 3350 60 51 0.75
2000 1340*1500 3410 60 51 1.1
3000 1410*2000 4000 60 51 1.5
4000 1620*2000 4250 60 51 1.5
5000 1810*2000 4300 60 51 2.2
6000 1980*2000 4550 60 51 2.2
7000 1930*2440 5000 60 51 2.2
8000 2060*2440 5000 60 51 3
9000 2180*2440 5050 60 51 3
10000 2300*2440 5050 60 51 3
12000 2270*3000 5600 60 51 4
15000 2530*3000 5700 60 51 4
20000 2640*3660 6400 60 51 5.5

The stainless steel mixing tank performance:
1.Tank and tank with the same or different forms of head structure, in the form of a jacket or a single combination of different requirements noted in a device structure.
2 .magnetic stirring device into a magnetic stirrer and under magnetic stirring on a magnetic stirrer suitable capacity (3-50m3) and large-torque device. Under magnetic stirring with capacity of less than (3m3) and equipment with high hygiene requirements.
3. interface with the international standard ISO standard quick chuck, the material is imported 316L or 304, the inner surface of the mirror-polished Ra ≤0.28 μm, the outer surface of the matte or mirror polished.
4 .Material: cylinder 304 and 316L (optional). 5 level gauge with universal flat level gauge, level gauge glass, level gauge static pressure sensor, ultrasonic level meter for selection.
Milk Production Line Machine Stainless Steel Mixing Tank

Milk Production Line Machine Stainless Steel Mixing Tank
Milk Production Line Machine Stainless Steel Mixing Tank
Milk Production Line Machine Stainless Steel Mixing Tank
Milk Production Line Machine Stainless Steel Mixing Tank
Milk Production Line Machine Stainless Steel Mixing Tank
About us
Guangzhou Li&Li Mechanical Equipment Co, . Ltd. Is professional corporation that mainly operates design, manufacture, installation and debugging of cosmetic, pharmaceutical, chemical, food, etc. Equipments. Enterprise strictly implements the ISO9001 standard management, with strong technical force, complete detection equipment, advanced process and complete product variety which including all kinds of Reaction Kettle, agitator bath, storage tank, vacuum emulsifying machine, conveyor, filling machine and non-standard equipments process and manufacture; Electrical engineering, automatic-control engineering, pipe design and equipment installation.

Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd. is mainly produce Q235 Steel Elbow.

Size range: seamless 1/2" to 24"

seam weldding 4" to 48"

Material: carbon steel ASTM A234 wpb, wpc; A106; st37.0; S235JR;

SS400; CT20, 20#; Q235A; Q235B

Standard: ANSIB16.9, ASME B16.28; DIN 2605, DIN 2615, DIN2616,

DIN2617;GOST 17375; GOST 17378; JIS2311

Wall thickness: 2MM----25MM

SCH5,SCH10S, SCH10, SCH20, SCH30, STD, SCH40,

XS, SCH60, SCH80, SCH100, SCH120, SCH140,

SCH160, XXS, SGP, LG,

Products:

Elbow: 45 deg, 90 deg, 180 deg, long redius, short redius

Q235 Steel Elbow

Q235 Steel Elbow, Q235 Stainless Steel Elbow, Q235 Steel Pipe Elbow

Hebei Jimeng Highstrength Flange-tubes Group Co.,Ltd. , https://www.jimengflange.com