Wire Stripping Machine/Stripping Tool/Stripping Machine

Model NO.: 508-E
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Model NO.: 508-E
Shape: Square
Size: Middle-Sized
Power: AC200/110/50Hz
Trademark: joinstars
Transport Package: Carton Box
Specification: 50*60*50cm
Origin: China
Wire Stripping Machine/Stripping Tool/Stripping Machine

Wire Stripping Machine/Stripping Tool/Stripping Machine
Wire Stripping Machine/Stripping Tool/Stripping Machine
Wire Stripping Machine/Stripping Tool/Stripping Machine
Wire Stripping Machine/Stripping Tool/Stripping Machine
Wire Stripping Machine/Stripping Tool/Stripping Machine
Specification
Weight: 30-31KG
Overall Dimensions: 390mm×350mm×235mm
Power: 160-300W   
Mode of Display: LCD Liquid Crystal Display Screen     
Cutting Length: 1mm - 9999mm   
Cutting Tolerance: ≤0.002×L (L = Cutting Length)      
Stripping Length: Head 0 - 35mm ,Tail 0- 15mm  
Cutting Cross-sectional Area of Wire Core:
(508C 0.2-2.5 mm2    508-SD 0.1- 4.5mm2   )
(508E 0.1-8 mm2     508-JE 0.1- 10mm2   )
Maximum Diameter of Conduit Pipe: ¢11
Middle-stripping: 10 places of stripping 

Material of Knife: High-quality Tungsten Steel 

Stripping Speed: 3000 - 80000 p c s /h 
Mode of Driving: Mode C Two-wheeled Drive
Mode SD/SDB/E/JE Four-wheeled Drive
Adjusting Speed: 0 Slowest, 9 Fastest    
  1. Operating Principle
The wire is conveyed through the wire-inlet rollers and the wire-outlet rollers and the wire cutting and stripping is finished through the knife rack assembly, which are all controlled by microcomputer technology.
  1. Introduction to Main Function of Every Part
1. Wire-inlet Rollers: for conveying wires and stripping wire heads.
2. Wire-outlet Rollers: for conveying wires and stripping wire tails.
3. Knife Rack Assembly: for wire cutting, head stripping and tail stripping.
4. Wire-inlet Gap Adjusting Rollers: for adjusting the wire-inlet gap, turn it down to decrease the gap and turn it up to increase the gap. 
5. Wire-outlet Gap Adjusting Rollers: for adjusting the wire-outlet gap, turn it up to increase the gap and turn it down to decrease the gap. 
6. Conduit Pipe Assembly: for ensuring the wire smooth and straight and preventing the wire from moving defectively when the wire moves from the wire-inlet rollers to the knife rack assembly. 
  1. Key Points for Operation of Mechanical Parts
1. The wire is put into the wire inlet, through the wire-inlet rollers and the conduit pipe, and then onto the knife edge.   
2. Wire-inlet Gap Adjusting: adjust the gap between the two rollers through the wire-inlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped so as to ensure normal stripping of wire covering.  
3. Wire-outlet Gap Adjusting: adjust the gap between the two rollers through the wire-outlet gap adjusting rollers to make the gap less than the outer diameter of the wire to be stripped, and adjust the indicator light of wire breakage at the critical state between on and out, then turn up for half circle. If the machine still stops because the wire knobs, adjust the gap a little smaller. 







This advanced wire stripping machine model 508-E is designed for precision and efficiency in electrical wire processing. It features a square shape with a middle-sized design, making it ideal for various applications. Powered by AC200/110/50Hz, it ensures stable operation in different environments. The trademark "joinstars" represents high quality and reliability. The machine is packaged in a sturdy carton box, making it easy to transport and store. Its specifications include dimensions of 50x60x50 cm, manufactured in China, known for its high standards in engineering and production. The unit weighs between 30-31 kg and has an overall dimension of 390mm x 350mm x 235mm. It operates on a power range of 160-300W, equipped with an LCD display for user-friendly operation. The cutting length can be adjusted from 1mm to 9999mm, with a tolerance of ≤0.002×L, ensuring accurate cuts every time. For stripping, it allows for lengths ranging from 0-35mm at the head and 0-15mm at the tail. It supports a wide range of wire cross-sectional areas, from 0.1mm² to 10mm², depending on the specific model. The maximum conduit pipe diameter it can handle is 11mm, and it supports 10 stripping positions for versatility. The knife is made of high-quality tungsten steel, ensuring durability and sharpness. The stripping speed ranges from 3000 to 80000 pcs/h, depending on the model. It uses either a two-wheel or four-wheel drive system, allowing for flexibility based on the application needs. The adjusting speed has nine levels, offering precise control over the process. The operating principle involves feeding the wire through the inlet and outlet rollers, where the cutting and stripping is performed by the knife rack assembly, all controlled via microcomputer technology. Each component plays a crucial role in ensuring the smooth and efficient operation of the machine. Understanding the function of each part is essential for optimal performance. The wire-inlet and outlet rollers help in conveying and stripping the wire, while the knife rack assembly handles the actual cutting and stripping. The gap-adjusting rollers allow for fine-tuning the wire passage, ensuring that the machine works efficiently without damaging the wire. Proper operation of the mechanical parts is key to achieving the best results. This includes correctly positioning the wire, adjusting the gaps appropriately, and monitoring the machine's performance to prevent any issues. By following these steps, users can maximize the machine's capabilities and maintain its longevity.

H-beam Assembling Machine

H-beam Assembling Machine

H-Beam Assembling Machine,H Beam Assembling Machine,Automatic Assembling Machine,H-Beam Assembling Equipment

Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com